Philips SemiconductorsObjective specification
Three quadrant triacs guaranteed commutation
GENERAL DESCRIPTION
Passivatedguaranteedcommutationtriacsinaplasticenvelopesuitableforsurfacemounting,intendedforuseinmotorcontrolcircuitsorwithotherhighlyinductiveloads.Thesedevicesbalancetherequirementsofcommutationperformanceandgatesensitivity.The\"sensitivegate\"Eseriesand\"logiclevel\"Dseriesareintendedforinterfacingwithlowpowerdrivers,includingmicrocontrollers.
BTA208S series D, E and F
QUICK REFERENCE DATA
SYMBOL
PARAMETER
BTA208S-BTA208S-BTA208S-Repetitive peak off-statevoltages
RMS on-state current
Non-repetitive peak on-statecurrent
MAX.600D600E600F600865
MAX.-800E800F800865
UNIT
VDRMIT(RMS)ITSM
VAA
PINNING - SOT428
PINNUMBER123tabStandardSMT1MT2gateMT2PIN CONFIGURATION
tabSYMBOL
T2T1213GLIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).SYMBOLVDRMIT(RMS)ITSM
PARAMETER
Repetitive peak off-statevoltages
RMS on-state currentNon-repetitive peakon-state current
full sine wave;Tmb ≤ 102 ˚Cfull sine wave;Tj = 25 ˚C prior tosurget = 20 mst = 16.7 mst = 10 ms
ITM = 12 A; IG = 0.2 A;dIG/dt = 0.2 A/µsCONDITIONS
MIN.---6006001
8MAX.
-800800
UNITVA
I2tdIT/dtIGMVGMPGMPG(AV)TstgTj
I2t for fusing
Repetitive rate of rise ofon-state current aftertriggering
Peak gate currentPeak gate voltagePeak gate powerAverage gate powerStorage temperatureOperating junctiontemperature
---
6572211002550.5150125
AAA2sA/µsAVWW˚C˚C
over any 20 msperiod
-----40-
1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac mayswitch to the on-state. The rate of rise of current should not exceed 6 A/µs.October 1999
1
Rev 1.200
元器件交易网www.cecb2b.com
Philips SemiconductorsObjective specification
Three quadrant triacs guaranteed commutation
THERMAL RESISTANCES
SYMBOLRth j-mbRth j-a
PARAMETER
CONDITIONS
BTA208S series D, E and F
MIN.---
TYP.--75
MAX.2.02.4-
UNITK/WK/WK/W
Thermal resistancefull cyclejunction to mounting basehalf cycleThermal resistancepcb (FR4) mounted; footprint as in Fig.14junction to ambient
STATIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise statedSYMBOLIGT
PARAMETERGate trigger current2
CONDITIONS
BTA208S-VD = 12 V; IT = 0.1 AT2+ G+T2+ G-T2- G-VD = 12 V; IGT = 0.1 AT2+ G+T2+ G-T2- G-VD = 12 V; IGT = 0.1 AIT = 10 A
VD = 12 V; IT = 0.1 AVD = 400 V; IT = 0.1 A;Tj = 125 ˚CVD = VDRM(max);Tj = 125 ˚C
---------0.25--------1.30.70.40.1
MIN.
TYP.
...D55515252515
MAX....E101010203030251.651.5-0.5
...F25252525404030
mAmAmAmAmAmAmAVVVmAUNIT
IL
Latching current
IHVTVGTID
Holding currentOn-state voltageGate trigger voltageOff-state leakage current
DYNAMIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise statedSYMBOLdVD/dt
PARAMETERCritical rate of rise ofoff-state voltageCritical rate of change ofcommutating current
CONDITIONS
BTA208S-VDM = 67% VDRM(max);Tj = 110 ˚C; exponentialwaveform; gate opencircuit
VDM = 400 V; Tj = 110 ˚C;IT(RMS) = 8 A;
dVcom/dt = 20v/µs; gateopen circuit
VDM = 400 V; Tj = 110 ˚C;IT(RMS) = 8 A;
dVcom/dt = 0.1v/µs; gateopen circuit
ITM = 12 A; VD = VDRM(max);IG = 0.1 A; dIG/dt = 5 A/µs
...D30
MIN....E60
...F70
-V/µs
TYP.
MAX.
UNIT
dIcom/dt
1.83.54.5-A/ms
dIcom/dt
Critical rate of change ofcommutating current
3.54.55.5-A/ms
tgt
Gate controlled turn-ontime
---2-µs
2 Device does not trigger in the T2-, G+ quadrant.October 1999
2
Rev 1.200
元器件交易网www.cecb2b.com
Philips SemiconductorsObjective specification
Three quadrant triacs guaranteed commutation
MECHANICAL DATA
Dimensions in mmNet Mass: 1.1 g6.73 max1.12.38 max0.93 maxBTA208S series D, E and F
seating plane5.4tab4 min6.22 max10.4 max4.6212.285 (x2)0.5 min0.50.30.530.8 max(x2)Fig.1. SOT428 : centre pin connected to tab.MOUNTING INSTRUCTIONSDimensions in mm7.07.02.152.51.54.57Fig.2. SOT428 : minimum pad sizes for surface mounting.Notes1. Plastic meets UL94 V0 at 1/8\".
October 19993Rev 1.200
元器件交易网www.cecb2b.com
Philips SemiconductorsObjective specification
Three quadrant triacs guaranteed commutation
DEFINITIONS
Data sheet statusObjective specificationProduct specificationLimiting values
BTA208S series D, E and F
This data sheet contains target or goal specifications for product development.This data sheet contains final product specifications.
Preliminary specificationThis data sheet contains preliminary data; supplementary data may be published later.
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above oneor more of the limiting values may cause permanent damage to the device. These are stress ratings only andoperation of the device at these or at any other conditions above those given in the Characteristics sections ofthis specification is not implied. Exposure to limiting values for extended periods may affect device reliability.Application information
Where application information is given, it is advisory and does not form part of the specification.© Philips Electronics N.V. 1999
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of thecopyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to beaccurate and reliable and may be changed without notice. No liability will be accepted by the publisher for anyconsequence of its use. Publication thereof does not convey nor imply any license under patent or otherindustrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of theseproducts can be reasonably expected to result in personal injury. Philips customers using or selling these productsfor use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resultingfrom such improper use or sale.
October 19994Rev 1.200
因篇幅问题不能全部显示，请点此查看更多更全内容