PS7206-1A-F3-A;PS7206-1A;PS7206-1A-F3;PS7206-1A-A;中文规格书,Datasheet资料

OCMOS FET

PS7206-1A

4-PIN SOP, 0.6 Ω LOW ON-STATE RESISTANCE

600 mA CONTINUOUS LOAD CURRENT −NEPOC Series−

1-ch Optical Coupled MOS FET

DESCRIPTION

The PS7206-1A is a low on-state resistance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side.

It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance.

FEATURES

• Low on-state resistance (Ron = 0.6 Ω TYP.) • Large continuous load current (IL = 600 mA) • 1 channel type (1 a output)

• Designed for AC/DC switching line changer

• Small and thin package (4-pin SOP, Height = 2.1 mm) • High isolation voltage (BV = 1 500 Vr.m.s.) • Low offset voltage

• Ordering number of taping product : PS7206-1A-E3, E4: 900 pcs/reel

• Pb-Free product • Safety standards

• UL approved: No. E72422 • BSI approved: No. 8241, 8242

: PS7206-1A-F3, F4: 3 500 pcs/reel

121. LED Anode2. LED Cathode3. MOS FET4. MOS FET4PIN CONNECTION(Top View)3 APPLICATIONS

• Measurement equipment • FA equipment

Document No. PN10297EJ03V0DS (3rd edition) Date Published February 2009 NS

The mark shows major revised points.

The revised points can be easily searched by copying an \"\" in the PDF file and specifying it in the \"Find what:\" field.

1999, 2009http://oneic.com/

PS7206-1A

PACKAGE DIMENSIONS (UNIT: mm)

4.0±0.57.0±0.34.40.100.15+–0.050.082.05+–0.050.080.05+–0.052.540.40+0.10–0.050.25 M0.5±0.3

MARKING EXAMPLE (LASER MARKING)

06-AN901No.1 pin MarkN901Type NumberAssembly Lot*1Week AssembledYear Assembled(Last 1 Digit)Rank Code*1 Bar : Pb-FreeRemark Applicable type numbers are underlined belowPS7206-1A

2

Data Sheet PN10297EJ03V0DS

http://oneic.com/

PS7206-1A

ORDERING INFORMATION

Part Number

Order Number

Solder Plating Specification

PS7206-1A PS7206-1A-A Pb-Free Magazine case 100 pcs PS7206-1A-E3 PS7206-1A-E3-A PS7206-1A-E4 PS7206-1A-E4-A PS7206-1A-F3

PS7206-1A-F3-A

Embossed Tape 900 pcs/reel

Packing Style

Safety Standard

Approval Standard products (UL, BSI approved)

Application Part Number PS7206-1A

*1

Embossed Tape 3 500 pcs/reel

PS7206-1A-F4 PS7206-1A-F4-A

*1 For the application of the Safety Standard, following part number should be used.

ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)

Parameter Symbol Ratings Unit Diode

Forward Current (DC)

IF 50 mA Reverse Voltage VR 5.0 V Power Dissipation PD 50 mW

Peak Forward Current

*1

IFP 1 A VL 60 V IL 600 mA ILP 1.2 A MOS FET Break Down Voltage

Continuous Load Current Pulse Load Current

*2

(AC/DC Connection)

Power Dissipation PD 300 mW Isolation Voltage BV 1 500 Vr.m.s. Total Power Dissipation Operating Ambient Temperature Storage Temperature

PT 350 mW TA Tstg

−40 to +85 −40 to +100

°C °C

*3

*1 PW = 100 µs, Duty Cycle = 1% *2 PW = 100 ms, 1 shot

*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.

Pins 1-2 shorted together, 3-4 shorted together.

Data Sheet PN10297EJ03V0DS

3

http://oneic.com/

PS7206-1A

RECOMMENDED OPERATING CONDITIONS (TA = 25°C)

Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current LED Off Voltage

IF 2 10 20 mA VF 0 0.5 V

ELECTRICAL CHARACTERISTICS (TA = 25°C)

Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage

VF

IF = 10 mA VR = 5 V VD = 60 V

VD = 0 V, f = 1 MHz IL = 600 mA

IF = 10 mA, IL = 100 mA

IF = 10 mA, IL = 600 mA, t ≤ 10 ms

1.2 70 0.6 0.6

1.4 5.0 1.0 2.0 0.8 0.8

V

Reverse Current IR MOS FET Off-state Leakage Current

ILoff

µA µA

pF mA Ω

Output Capacitance Cout Coupled

LED On-state Current

IFon

On-state Resistance Ron1

*1, 2*1, 2

Ron2 ton

Turn-on Time Turn-off Time

IF = 10 mA, VO = 5 V, RL = 500 Ω, 0.4 2.0 ms

9

toff PW ≥ 10 ms 0.08 0.5

0.5

Ω pF

Isolation Resistance RI-O Isolation Capacitance CI-O

VI-O = 1.0 kVDC 10 V = 0 V, f = 1 MHz

*1 Test Circuit for Switching Time

IFPulse InputVLInput50 %0VO = 5 VInput monitorRinRLVOmonitorOutput90 %10 %

tontoff

*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.

Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase.

4

Data Sheet PN10297EJ03V0DS

http://oneic.com/

PS7206-1A

TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)

MAXIMUM FORWARD CURRENT vs.AMBIENT TEMPERATURE100Maximum Forward Current IF (mA)MAXIMUM LOAD CURRENT vs.AMBIENT TEMPERATURE900Maximum Load Current IL (mA)806060040200–253000255075851000–25025507585100Ambient Temperature TA (°C)Ambient Temperature TA (°C)FORWARD VOLTAGE vs.AMBIENT TEMPERATURE1.81.6Output Capacitance Cout (pF)OUTPUT CAPACITANCE vs.APPLIED VOLTAGE200f = 1 MHzForward Voltage VF (V)1.41.21.00.8–25IF = 50 mA30 mA20 mA10 mA5 mA1 mA150100500255075100020406080100120Ambient Temperature TA (°C)Applied Voltage VD (V)OFF-STATE LEAKAGE CURRENT vs.AMBIENT TEMPERATURE10Off-state Leakage Current ILoff (A)–6LOAD CURRENT vs. LOAD VOLTAGEIF = 10 mA,IL = 600 mALoad Current IL (mA)900600300VD = 60 V10–710–810–910–1010–110–0.8–0.40–300–600–9000.40.820406080Ambient Temperature TA (°C)Load Voltage VL (V)

Remark The graphs indicate nominal characteristics.

Data Sheet PN10297EJ03V0DS

5

http://oneic.com/

PS7206-1A

NORMALIZED ON-STATE RESISTANCE vs.AMBIENT TEMPERATURE3.0Normalized On-state Resistance RonON-STATE RESISTANCE DISTRIBUTION30n = 50 pcs,IF = 10 mA,IL = 600 mAt 10 ms2.52.01.51.00.50.0–25Normalized to 1.0 at TA = 25°C,IF = 10 mA, IL = 600 mANumber (pcs)252015105002550751000.40.60.8Ambient Temperature TA (°C)On-state Resistance Ron (Ω)TURN-ON TIME vs. FORWARD CURRENT3.02.5Turn-on Time ton (ms)TURN-OFF TIME vs. FORWARD CURRENT0.300.25Turn-off Time toff (ms)VO = 5 V,RL = 500 ΩVO = 5 V,RL = 500 Ω2.01.51.00.50.200.150.100.05051015202530051015202530Forward Current IF (mA)Forward Current IF (mA)TURN-ON TIME DISTRIBUTION3025Number (pcs)TURN-OFF TIME DISTRIBUTION3025Number (pcs)n = 50 pcs,IF = 10 mA,VO = 5 V,RL = 500 Ωn = 50 pcs,IF = 10 mA,VO = 5 V,RL = 500 Ω20151050201510500.40.60.080.12Turn-on Time ton (ms)Turn-off Time toff (ms)

Remark The graphs indicate nominal characteristics.

6

Data Sheet PN10297EJ03V0DS

http://oneic.com/

PS7206-1A

NORMALIZED TURN-ON TIME vs.AMBIENT TEMPERATURE3.0Normalized Turn-on Time tonNORMALIZED TURN-OFF TIME vs.AMBIENT TEMPERATURE3.0Normalized Turn-off Time toff2.52.01.51.00.50.0–25Normalized to 1.0 at TA = 25°C, IF = 10 mA, VO = 5 VRL = 500 Ω2.52.01.51.00.50.0–25Normalized to 1.0 at TA = 25°C, IF = 10 mA, VO = 5 V,RL = 500 Ω02550751000255075100Ambient Temperature TA (°C)Ambient Temperature TA (°C)

Remark The graphs indicate nominal characteristics.

Data Sheet PN10297EJ03V0DS

7

http://oneic.com/

PS7206-1A

TAPING SPECIFICATIONS (in millimeters)

Outline and Dimensions (Tape)2.0±0.054.0±0.11.75±0.11.5+0.1–0 2.9 MAX.5.5±0.0512.0±0.21.55±0.18.0±0.17.4±0.14.6±0.12.4±0.10.3Tape DirectionPS7206-1A-E3PS7206-1A-E4Outline and Dimensions (Reel)2.0±0.52.0±0.5φ13.0±0.20 φ180+–1.51φ60+–0R 1.0φ21.0±0.813.5±1.017.5±1.0Packing: 900 pcs/reel11.9 to 15.4Outer edge of flange 8

Data Sheet PN10297EJ03V0DS

http://oneic.com/

PS7206-1A

Outline and Dimensions (Tape)2.0±0.054.0±0.11.75±0.11.5+0.1–0 2.9 MAX.5.5±0.0512.0±0.21.55±0.18.0±0.17.4±0.14.6±0.12.4±0.10.3Tape DirectionPS7206-1A-F3PS7206-1A-F4Outline and Dimensions (Reel)2.0±0.5φ330±2.02.0±0.5φ13.0±0.2φ100±1.0R 1.0φ21.0±0.8φ13.0±0.213.5±1.017.5±1.0Packing: 3 500 pcs/reel11.9 to 15.4Outer edge of flange Data Sheet PN10297EJ03V0DS

9

http://oneic.com/

PS7206-1A

RECOMMENDED SOLDERING CONDITIONS

(1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Number of reflows • Flux

260°C or below (package surface temperature) 10 seconds or less 60 seconds or less Three

Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)

• Time to preheat temperature from 120 to 180°C 120±30 s

Recommended Temperature Profile of Infrared ReflowPackage Surface Temperature T (°C)(heating)to 10 s260°C MAX.220°Cto 60 s180°C120°C120±30 s(preheating)Time (s)

(2) Wave soldering • Temperature • Time

• Preheating conditions • Number of times • Flux

(3) Soldering by soldering iron

• Peak temperature (lead part temperature) • Time (each pins) • Flux

(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C.

(4) Cautions • Fluxes

Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

350°C or below 3 seconds or less

Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)

260°C or below (molten solder temperature) 10 seconds or less

120°C or below (package surface temperature) One

Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)

10

Data Sheet PN10297EJ03V0DS

http://oneic.com/

分销商库存信息:

CEL

PS7206-1A-F3-APS7206-1A-A

PS7206-1A

PS7206-1A-F3